How To Charge Juul Without Charger
With a rechargeable battery, the well-known vape JUUL allows for extended usage. Except for temporary models, nearly every vape you may buy comes with a battery charger. So you can replace their dead batteries with new ones.
However, there may be times when your vape’s batteries become out of power. And you are unable to recharge them because the charger is missing, destroyed, or simply inaccessible.
So if you have a juul device then how to charge Juul without charger? The various options you have for charging the device without a charger will all be covered in this article.
Can you charge a Juul without charger?
Similar to other vaporizers, a JUUL operates with a battery that can be recharged. When the power source runs out, you may recharge it instead of throwing the device away and keep using it.
You will eventually need to use the USB charger that came with the gadget to recharge the battery.
If you misplace your JUUL device charger. You may quickly create a new one by cutting a few wires within a phone cord. The device you are using will be completely charged in approximately an hour!
So this article is all about the solution if you want to know how to charge a Juul without a charger. So read the post till the end for complete knowledge.
Is it safe to charge Juul without charger?
The answer to this question is simple: No. It is not safe to charge Juul without a charger.
- Charging the device without the proper charger can lead to several risks. Including damage to the device, fire hazards, and even personal injury.
- When you charge your Juul without the proper charger, you risk damaging the battery. Which can lead to a shorter battery life. This is because the charger is designed to provide the right amount of voltage and current to the battery.
- When you use a different charger, you could end up overcharging or undercharging the battery. It can damage its cells and affect its capacity.
- Moreover, charging Juul without a charger can also lead to fire hazards. In the case of using a charger that is not designed for Juul, the battery can overheat, leading to a fire.
This is because the charger may not be able to regulate the voltage and current. It can cause the battery to overheat and, in extreme cases, explode. But if you still want to know and it’s urgent so I will tell you some ways How to charge Juul without charger?
Related Articles: charge elf bar 5000, dab pen charge without charger
How to charge Juul without the charger?
While the Juul charger is readily available, some users may find themselves in a situation. Where they need to charge their Juul without the charger. This article aims to investigate the feasibility and safety of charging Juul without the charger.
- Design a charger by using a Phone cord
- Using a USB cable as a charger
- Charge the Juul by harness magnetic feature
Design a charger by using a Phone cordÂ
If you don’t have your charger with you, what can you do? Luckily, there is a way to create a Juul charger with a phone cord. In this guide, we will provide a step-by-step process for creating your own Juul charger with a phone cord.
- Gather Materials
To create a Juul charger with a phone cord, you will need a few materials. These include a USB port, a phone cord, a pair of scissors, and a Juul device. You may also want to have a rubber band or tape on hand to secure the cord in place.
- Cut the Phone Cord
The first step in creating a Juul charger with a phone cord is to cut the cord. Start by cutting the end of the cord that plugs into the phone. You should now have two separate cords, one with a USB port and one with a phone jack.
- Strip the Wires
Next, you’ll need to strip the wires on the phone jack cord. Use the scissors to carefully strip the outer insulation from the cord, exposing the wires inside. Red, black, white, and green should be the four wires you have.
- Connect the Wires
Now it’s time to connect the wires. Connect the red wire to the positive terminal on the USB port and the black wire to the negative terminal. The white and green wires are not needed and can be cut off.
- Test the Charger
Once the wires are connected, plug the USB port into a power source and test the charger. If it’s working correctly, you should see the Juul light up and begin charging.
- Secure the Cord
Finally, you’ll want to secure the cord in place. You can use a rubber band or tape to keep the cord connected to the Juul device. This will prevent the cord from becoming disconnected while the Juul is charging.
Using a USB cable as a charger
You can also use a USB cable to charge your Juul device. So, follow these steps;
- Step 1
Find a USB cable with a plug. This can be any USB cable that has a plug at one end. You can use a USB cable from your phone, tablet, or any other device that has a USB port.
- Step 2
Insert the USB cable into the USB port on your computer or laptop. Make sure that the USB port is working and is not damaged.
- Step 3
Take the other end of the USB cable and plug it into the Juul. You will notice that Juul’s LED light will start blinking, indicating that it is charging.
- Step 4
Wait for the Juul to fully charge. It usually takes around an hour to fully charge the Juul. Once it is fully charged, the LED light will turn off.
- Step 5
Disconnect the USB cable from the Juul and your computer or laptop. You can now use your Juul as usual.
Charge the Juul by harness magnetic feature
If you find yourself without a charger and want to know how to charge a Juul don’t fret! You can still charge your Juul by harnessing its magnetic feature.
- Find a USB port
The first step to charging your Juul without a charger is to find a USB port. This can be a computer, a laptop, or any other device that has a USB port. Once you have found a USB port, you will need to locate the magnetic connector on your Juul.
- Connect the magnetic connector to the USB port
The magnetic connector on your Juul is located at the bottom of the device. It is a small, flat surface with two metal pins. To connect your Juul to the USB port, simply place the magnetic connector against the USB port. The magnetic feature will hold the Juul in place and allow it to charge.
- Wait for Juul to charge
Once the Juul is connected to the USB port, it will start to charge. The time it takes for the Juul to charge will depend on how much battery life it has left. If the Juul is completely dead, it may take up to an hour to fully charge.
- Disconnect the Juul from the USB port
When the Juul is fully charged, you can disconnect it from the USB port. Simply pull the Juul away from the USB port and the magnetic feature will release it. Your Juul is now ready to use!
So now you are aware of different methods of how to charge Juul without charger.
Some other methods to charge your juul device
Portable power bank
Another method that can be used to charge a Juul without a charger is to use a portable power bank. These devices are designed to provide a portable source of power for electronic devices.
While they can be effective for charging a Juul. It is important to make sure that the power bank has enough power to fully charge the device.
Portable charger
Another option is to use a portable charger. Portable chargers are small, compact devices that are designed to charge other devices on the go. They are easy to carry around and can be used to charge your Juul without a charger.
To do this, simply plug your Juul into the portable charger using a USB cable. Once connected, the portable charger will start charging your Juul.
I hope this guide will help you with how to charge Juul without the charger. Because it contains different methods with brief steps.
Conclusion
In summary, if you use a Juul device and you forget the charger then How to charge Juul without charger? While it is possible to charge a Juul without a charger, it is important to understand the risks involved.
The best way to ensure that your Juul is always charged. And ready to use is to carry a charger with you at all times. Using other methods to charge the device can lead to potential problems, including damage to the device and overheating.
But if you want to try these methods, then it is all up to you!